Review: Instamic Pro Stereo Microphone and Audio Recorder

Overview ፡ Flex The smartest, smallest and most affordable microphone and audio recorder.

Behavior

• Recording at 48 kHz / 96kHz - 24-bit format
• Mono and double mono; It has a pro stereo.
• In all directions
• Frequency response from 50 to 18,000 Hz
• Lots of clips to copy
• Adhesive, magnetic, velcro and adhesive cord
• Rapid spray protection; Not in professional water
• Works with OR without mobile app
• Turn on Instamic with one key
• Sync with your Bluetooth device

Quality Instantatic Introduced for the first time in June 2015 through Indigogo . If there are no supporters, the institute may be worthless and that is what I like about public fundraising. It gives entrepreneurs the opportunity to turn their dreams into reality. It also gives fans the opportunity to discount this new product. There are always dangers and problems in every campaign and product, but this is another topic.

Instamic is a portable Lavender, large handheld or small pistol that can be easily attached to an object or object to capture impossible sound. Ideal for weddings, documentaries, musicians.

I am happy to say that Instamic is fully applicable and used by many developers and fans. So, let's move on to the Instamic Pro review.


The instam is well packed. The arm only shows the instamic. Background has basic Instamic features with UPC bar code.


On the left side of the box is a bar code with your serial number and all the correct copyright information. The right side of the box lists all Instamic-supported items. It only lists Apple products but works with Android devices.


Instamic is available in three models: Instrumental Basic (Mono) in white and Instamental Pro (Mono or Stereo) in black. Both versions include three installation options (magnet, tape and velcro) and a micro USB cable. The only difference, in addition to the color, is that the basic IP65 splash-proof (rain or spray) and the Pro is waterproof up to 5 feet deep.

There is 8GB on-board storage for all your audio and nothing is stored on your smartphone. It can record 48/96 kHz, 24-bit recording, up to 16 hours of compressed WAV files and has a frequency response of 50 to 20,000 Hz. Full charge lasts about 3 hours.


The micro USB cable is nothing special. If you have another micro USB cable you can use that if you want.

Simply plug the USB cable and the other end into your computer or battery to charge the instal. When all the LEDs blink, it means it is fully charged.

Simply connect the USB cable and the other end to your computer to transmit audio. Instamic is seen as a separate drive. Once found, simply drag and drop the files to your computer. When editing a video, all you have to do now is synchronize the audio with your video. You can use lines or just clap.


The binding option is basically a stand with 3M tape on the back. This is a more permanent attachment solution and is my least favorite.

Velcro is great when you want to hold items in your hand and hold something semi-permanent. This is great if you want to attach instamic to the top of your camera to record sound.


I prefer the magnetic one because it can be attached to a Lapel mic, a microphone, or a speaker. I made a tape covering the magnetic side. It hides the appearance of silver.


You also have the option to purchase an Instant Hide and Protection case ($ 16 each; available in 10 colors: white, black, dark blue, dark green, dark gray, light gray, light blue, light green, pink, red). ). The deck is large enough for Instamic. You cannot use any support brackets.

Windbreaks ($ 20 each, black or white) are available. They are basically dead cats that help to block the air in the wind. You can easily use the treadmill as the windshield slides on Instamic.


In front of the static there is an enamel logo, which doubles as a power key, and there are three more LED indicators. LEDs indicate battery status, charge status and audiometer. You can use Instamik without the app, but you can't control anything. Just start and stop.

You will find the serial number of your device on the back.


There are four mono microphones above and if you buy the Pro model there are two stereo microphones on the sides. At the bottom is a micro USB port for charging, transferring files and updating firmware.


Simply press the power key once to turn on Instamic. Wait for a few seconds until Instamic shows the battery level (LED turns on). Without the offline mode, the app will start copying if you press the key again. The LED not only flashes but also tells you the sound. Simply press the key again to stop recording. And to turn it off, just press and hold the button until the first LED turns off. You can also turn off the device through the app.

On my crowded device, the key is not pressed every time I press it. Based on user feedback, I have been told that retail stores feel the pressure of a single button.


To connect Instamic to your iOS or Android mobile app, simply enable Instamic and download the app to your electronic device. The Instamic app automatically searches for available instances. Click on it and select the device you want to use. A green symbol appears next to it and merges. Your device is under the WiFi signal icon.


You can change settings (device icon) in the app such as automatic gain, recording mode and sample size. If you have multiple devices, you can also change the Instamic name. This way you can easily track them and find out which settings you have changed.


The good thing about Instamic is that you can manage the profit automatically. When you do a speech test, it listens to the sound and adjusts to the appropriate level and starts recording automatically.

Click the microphone icon when you turn off automatic detection and start recording. Here you have a large round red button to start recording and a large square red button to stop recording. You can also change the decibels instantly by moving the slider or clicking the number on the left to select the predefined value. You can also turn the LED on and off to prevent interference. You can also perform a sound test and monitor the sound by clicking the control button.


Firmware upgrade is also easy to perform. Just plug the micro USB into your computer and installer. Instantatic will appear on your desktop once connected. Double-click and the "Instamic Firmware Upgrade" software will appear. From here, just follow the instructions to update Instamic firmware.

The latest firmware 1.2.29, starting in April 2019, will allow any Instamic TIMECODE to read from Tentacle Sync E.


Check out our full box opening video, review, Instamic app and audio samples. We have the Canon M5 Built-in Microphone Road Filter Kit [ Amazon | Photo from Bosnia and Herzegovina | Adorama ] and Instamic Pro.

Summary በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ በአጠቃላይ ነው ነው ነው ነው ነው ነው ነው ነው ነው ነው ነው ነው There are many options for beginners and advanced users. The sound quality is really good.

Because it is an audio recorder, you can use it to record music or even podcasts, which makes it very versatile. Works well as a primary audio source or as a backup.

What do you think looks best?

---