Review: XTAR PB2S 18650 21700 Battery Charger Power Bank
Summary ፡ Fate XTAR PB2S will soon become your favorite Li-ion battery charger. Equipped with Power Bank function, this charger saves not only the battery but also your favorite USB electronics. PB2S supports fast battery recovery methods for smartphones, tablets և other QC3.0 և PD3.0. In addition, USB-C և USB-A ports are used to charge two external devices at the same time. The Xtar PB2S has an easy-to-read interface that provides information such as charge / current, voltage, battery power percentage վում transferred between two batteries և by pressing the side button. Other advantages of PB2S are Xtar's own capabilities. The function of the 0 V activation function is to immediately reset the excess battery և to restore it to its former working condition, and the three-phase charging system is now powered by a steady current. And then turn on the DC voltage after the battery is fully charged.
Properties:
- Portable charger with Power Bank function with 18650 batteries ելի unexpected 18650 batteries 18700 20700 21700. With your own battery you can run your own power bank with a capacity of up to 10000 mAh.
- Maximum 3A Express, supports the most popular QC3.0 + PD3.0 Express with two protocols.
- The accuracy number tube shows real-time charging current և voltage տոկոս battery power և supports the key with one hand to control the voltage and current of each battery.
- Type-C և USB-A ports can be used to power and charge two external devices at the same time, making it ideal for outdoor use. (* PB2S can charge "low power" devices such as Bluetooth headsets և USB lights)
- PB2S is equipped with a magnetic coating that protects it from dust; falling; Integrated tape for easy battery drain; Rubber-coated material, skin-friendly to the touch.
Quality / Utilities. Something that should be in every bag of the camera or in general is the power bank. XTAR sent us a PB2S recharge bank for review, we tested it using our usual usage.
The unit included with the XTAR PB2S itself includes a USB-A to USB-C cable, manual և also Velcro. I'm not sure why it's used չէ it's not listed on the XTAR website.
The upper part of the chimney has a screen on the front. The part with the XTAR logo is the magnetic seal cover of the battery.
There are two doors right at the top of the screen. USB-A և USB-C: USB-A port comes out only when USB-C port is on և comes out. So you can charge up to two devices at once.
USB input-output support QC3.0 և PD3.0 (5V 2A / 9V 2A / 12V 1.5A).
If the magnetic cover is removed, there are two battery compartments with the bureaucracy. This red tape allows you to easily remove the battery from the bar. To remove it, simply grab the tail of the tape, lift it over the tape, and the battery will come out.
Battery area supports 3.6V / 3.7V Li-ion / IMR / INR / ICR batteries as well as 18650 shielded batteries and 18650 18700 20700 21700 batteries. This is the same type of battery used for flashlights, laptop batteries, wireless devices, and battery-powered accessories.
This is one of the reasons I love PB2S because it allows you to do it yourself ... Choose your battery և it can be replaced. Yes, you can combine different batteries. So you can have 18,650 in one bay and 21,700 in the other և it will go smoothly. Traditional battery banks have integrated, non-replaceable batteries.
If the battery is charged, the display shows the battery percentage as well as voltage and current. The cover is smoky և slightly frozen, so the screen is not as clear as the clean screen, but it is still very bright և easy to read.
If the battery is charged, the display shows the battery percentage as well as voltage and current. The cover is smoky և slightly frozen, so the screen is not as clear as the clean screen, but it is still very bright և easy to read.
The top of the screen means "Exit" to indicate that PBS2 is charging your device.
You can charge all types of devices with a high-capacity lithium-ion battery. Using the Canon LP-E6 XTAR VN2 battery, we were able to charge it with the LARK 150 lavalier connector and the Sony Vemico NP-F970 battery .
Plus, you'll have no problem charging your smartphones: tablets. I do not have a USB-C light, but I want to show you what it looks like when it comes out via USB-C. It's no different from a standard USB-A port, but USB-C charges your device faster.
To charge the battery with P22, simply connect the USB-C cable, և USB-C can be USB-C or USB-A to USB-C և indicates "IN" as well as և voltage և current.
Summary ፡ Overall, XTAR PB2S 18650 21700. Power Bank Charger
You can charge all types of devices with a high-capacity lithium-ion battery. Using the Canon LP-E6 XTAR VN2 battery, we were able to charge it with the LARK 150 lavalier connector and the Sony Vemico NP-F970 battery .
Plus, you'll have no problem charging your smartphones: tablets. I do not have a USB-C light, but I want to show you what it looks like when it comes out via USB-C. It's no different from a standard USB-A port, but USB-C charges your device faster.
To charge the battery with P22, simply connect the USB-C cable, և USB-C can be USB-C or USB-A to USB-C և indicates "IN" as well as և voltage և current.
Summary ፡ Overall, XTAR PB2S 18650 21700. Power Bank Charger
